Question on CR2 battery charger?

[Vapoorer]

Hey, just have a quick question on a charger

Can i charge my unprotected cr2 batterys with a spacer in my tenergy 3v battery charger??? the one i have charges my Tenergy 3.0v CR123A batteries the Lifepo4 ones (Yellow in color) NOT THE BLUE ONES!!!

or do i need to get a diffrent charger??? that would be awesome if i could because i can get some spacers that i believed will fit perfect from the craft store and save a little money at the same time

[capevette]

I wouldn't I charge mine in there charger thats specific for them. Mine is a Since but heres a link to one
http://www.dealextreme.com/details.dx/sku.2031

As always be careful and always check the voltage on your batteries prior to putting in the charger and when you take them out.
I have two sets and always keep the pairs together. I've marked the pairs so they don't get mixed up.

[Vapoorer]

i think that one is a 3.6v one iam looking for a 3v one i was going to get it but it dos't say spacifics but if you look closely at this picture you can see it says 3.6v (this is the charger that your talking about)

you might have to go to there site to veiw it bigger
__________________________________________________ __________________________________________________ ____________________________
i was going to get this charger:


but i was just trying to save some money i also had read it somewhere dont remember where but they said you can but i dint trust it at the time now i can find that thread to see if there was any updates of them testing it. but enless someone tells me they do use in for li-on 3v batteries then iam not going to do it and be out of a charger.

[capevette]

Should work (SHOULD)
The Spec on my SINCE charger Model SE CR2
OUTPUT 2 x 3.7v - 300mA +- 50mA

these are the spec from ultrafire website

UltraFire WF-138A Switching Charger
INPUT:100V-240v~50-60Hz
OUTPUT:3.6V-250mA;2*3.6V-250mA
OUTPUT:3.0V-250mA;2*3.0V-250mA
it is integrated circuit protection

[Vapoorer]

iam just going to get the UltraFire WF-138A Switching Charger..

thanks for the help Buddy

OMG hold up i just read the back of the charger the tenergy one nthat charges the yellow lifepo4 batteries and it says to only charge li-on batteries in there how did i not see that so that means i can use it to charge my cr2 3v ones right?

i tryed taking a picture of it but i dont have macro and its all blurry but ill type it out exactly what it says on the back the tenergy lifepo4 charger:

Model: PH-123a-3.0
INPUT:12.Vd.c. 250mA
OUTPUT:3.6Vd.c. 360mA
LED STATUS
RED LED-CHARGE
RED LED TURN TO GREEN- FULLY CHARGED
GREEN LED-NO BATTERIES BE DETECTED
THEN IT SAYS:
"There is a picture of a triangle with a ! in the middle" then it writes:
The charger is intended for use with li-ion batteries only.
Attemt to charge other type of batteries may cause personal injury and damage to charger..

So with it saying this that means i will be able to charge my cr3 3v Li-ion batteries right? of course with a spacer bassed on what this says above right?

[Frostmonkey]

So with it saying this that means i will be able to charge my cr3 3v Li-ion batteries right? of course with a spacer bassed on what this says above right?

No. You must use the charger that came with the batteries.

"Warning:

You must use the 3.0V RCR123A battery charger included to charge these batteries, please do not use other chargers, include any other 3.0V or 3.6V Li-Ion bttery charger, which can not correctly charge these LiFePO4 750mah 3.0V Li-Ion batteries. Do not charge these batteries in any other charger.

Do not use this charger for any other than the 3.0V LiFePO4 750mah RCR123A Batteries we sell. "

http://www.batteryjunction.com/2rc375reliba.html

[Vapoorer]

yea i know it says that on the website but why does it say to only charger li-ion batteries on the back of the charger,and i am not charging my lifepo4 batteries with anything else but the charger that came with it but because it says on the back of the charger do not charge anything else other than li-ion batterys in this charger witch the 3v cr2 are li-ion batteries are just wanted to make sure before i tried it because i have read a few people said its fine but i cant find that thread anymore to see if there was any updates..

is it a diffrent chemistry the charger when its chargeing (i know the battery are),also isant a li-ion battery charger a li-ion battery charger as long as you use 3v battery with 3v charger and 3.6/3.7v battery with 3.6/3.7v charger

ill just get the Ultra fire and call it a day its not worth the risk for $10
But iam still curious to know why?
If anyone knows can they explain what is the diffrents between these 2 when they are charging the batteries. arnt they both li-ion chargers

The Lifepo4 battery charger
UltraFire WF-138A Switching Charger

I kinda think its a marketing SKEEEEEM!

[capevette]

Vapoorer,
I have the Tenergy Charger also
Model PH-123A-3.0A

Next to the triangle mine says
"The charger is suitable for 3.0V
RCR123A Li-ion batteries only
Attempt to charge other type of
batteries may cause personal
injury and damage to charger.

Personally with
CR2's I use only the charger designed for them

My other batteries Li-ion "Protected" type
18650,RCR123a,14500 I tend to charge in my TrustFire W-139 Multi Charger

[Vapoorer]

yea i also have for my 186500 14500 and my 1440 a trustfire model number TR-001 that i use for these batteries and i have the tenergy one that came with my lifepo4 batteries ..

i ordered the UltraFire WF-138A Switching Charger just to be safe.

but i aim curious to know if i had too or not. ive bine looking for that thread all day i cant find it owel.....

Thanks for the help tho @capevette it helped to get a second opionion on it

[MITRICH]

I got a 138a too. Works for me. It cuts about at about 3.5.....
I dont know about the tenergy charger, but dont use any charger that puts out high mA like wf-139 (it puts out 450mA)