cart question please help.

[Skorne42]

So today I decided to use carts with my new sb (which I love) I have noticed that it is only vaping the juice on the first 20% of the wick before it starts to taste like it is just dry burning. Even when I pull the wick it still shows that the bottom 80% is full of juice. How do I get it to vap all the juice on the whole wick before it starts to taste nasty?
Thanks in advance

[KEITH97M3]

So today I decided to use carts with my new sb (which I love) I have noticed that it is only vaping the juice on the first 20% of the wick before it starts to taste like it is just dry burning. Even when I pull the wick it still shows that the bottom 80% is full of juice. How do I get it to vap all the juice on the whole wick before it starts to taste nasty?
Thanks in advance

Skorne, I had the exact same problem until I tried the spring from the pen and filler trick. What I do is, get a spring from a pen, stretch it to double its size, cut it with side cutters 1/8th of an inch shorter than the carts depth. You may have to smash the sides of the spring and make it skinnier so it fits the lower part of the cart. Get a piece of the foam filler and use only enough to cover the spring and stick out just a hair out of the cart. When you do this, the filler will touch the atty and have a slight constant pressure on it, just be sure to not spin the cart or the filler will either get stuck to the atty or the spring. Once you get the hang of this method, you will be happy again.

PS, the reason I stretch my spring is because I found that the liquid around the spring doesn't go into the center if the spring coils are too close together, you know, the same theory of how a metal screen can be put over a cup of water and be turned upside down without spilling water ? Its the same principle. That is the same reason that you don't need that much of the filler material to stop the cart from leaking all the liquid out. Experiment with this a little, I am sure you will find a happy medium.