Wetbox questions

[Snoopbob7]

I was wondering if anyone had any thoughts or tips on how to succesfully use a regular 510 atty on the wetbox. I have tried and it doesn't seem to be working all the way right. Is there a different atty that works best, other that a cartomizer. I can't stand the way cartomizers change the taste. Thanks in advance. Holla atcha boy!

[BiilyBlavk]

Simply cut the needle shorter. You can measure the length you need by carefully inserting it into the atty till it hits, then subtract about 1mm (maybe a hair more). Install it and use the measurement you got and cut. Remember you don't want the needle hitting the inside (at the top) of the atty.

Also note it may be best to use knock-off 510's (> 3Ω) to keep the amp draw down for that pitifully under-rated switch.

Here's Kaji's Jouneyman with a native 510, note the tube length.

[Snoopbob7]

Hey Billy... Thanks so much for the tip. I am going to do exactly as you said and give it another try. As well as using an aftermarket 510 atty. I'll let you know how it works for me. Thanks again!

[BiilyBlavk]

Your welcome. And if push comes to shove you can always get a spare bottle assembly.

Injector Bottle Assembly for 510 WetBox - VaporFlow

And keep that thing clean, the cramped construction puts that weak switch right were juice leakage can can soak it.

[Snoopbob7]

PROJECT: WETBOX MOD is complete

It vapes great now. I'm gonna keep an eye on the needle insertion point and make sure it doesn't get soaked. Thanks again for the help.