Adapters?

[Wlfwo]

Is there an adapter for the battery of a 901 so I can charge it with a 510 charger? I got that 5 battery charger from TW and I would LOVE to be able to charge my 901's in there also. Much better than having an entire plug in strip taken up with multiple chargers.

[firhill]

Rip the guts from a dead 901 atomiser and add a dead 510 battery connector to the other end of it and solder a wire(or even a nail) between the centre connectors.

Another (by the computer) option is to buy a 4/6 port hub and plug as many universal USB chargers as you need into it.

[Jason-ElectroNicStix.com]

find a place selling mods. There are acutal 510 to 901 batt adapters out there.. at least i would think so. I know i can get them from china but it might be work a look around.

Jason

[Wlfwo]

Rip the guts from a dead 901 atomiser and add a dead 510 battery connector to the other end of it and solder a wire(or even a nail) between the centre connectors.

Another (by the computer) option is to buy a 4/6 port hub and plug as many universal USB chargers as you need into it.

I am not mechanically inclined, I'd burn something down.........which could be a good thing depending on where I was at the time. <EG>

[Wlfwo]

find a place selling mods. There are acutal 510 to 901 batt adapters out there.. at least i would think so. I know i can get them from china but it might be work a look around.

Jason

Great! If they are out there, I shall find them. I hope. LOL

[MadVapes]

Although there are adapters and parts to make your own available, doesn't mean it will charge it safely..
It could even be dangerous..

hoog

[MrEcig]

I agree with Mad..... could be very dangerous. I would advise against it.

[Wlfwo]

Although there are adapters and parts to make your own available, doesn't mean it will charge it safely..
It could even be dangerous..

hoog

How would they be different from the extenders you have to use for the manual batteries? Other than re-threading the battery they are attached to.

[MadVapes]

How would they be different from the extenders you have to use for the manual batteries? Other than re-threading the battery they are attached to.

The biggest difference is not the connectors but the batterr or charger..

Some chargers have the limiting circuit built in so a battery won't be overcharged..

Other products the circuit is in the battery.

You really can't be sure that a combo of products will work together unless they were made to work together.

Hoog

[Saso]

THIS IS A COPY OF THE EMAIL I SENT TO MADVAPES IN HOPE OF ATTEMPTING TO SOLVE THIS ISSUE, PLEASE HELP YOURSELF TO READING MY RESEARCH AND QUESTIONS:

Hi Madvapes,
I was reading a few of your FORUM posts here: (http://www.nu-vapor.com/forum/showth...p?737-Adapters).
And at the end of reading I can only come to one conclusion, that there are differing opinions out there, or the desire to sell is just too great regardless of battery explosion.
Point is, I just purchased some adapters from this guy because I wanted to be able to swap my 901's with my 510 atty's, and obviously exchange the carts for refilling purposes. Long story short I was also inclined to believe that his adapters could also be used to charge the 901's battery's through the use of the adapter. His site doesn't promote this as an option: (http://www.electronic-cigz.com/901to510ad.html), but the same adapters over at altsmoke are promoted for charging: (http://altsmoke.com/feature/batterya...ccddaaa3572812).
This is a very confusing situation, and I can only believe that through the circuitry, and cut-offs, and lack of communication with the FOREIGN(China) manufacturer's. We are stuck to ponder with risk of explosion and health hazard, whether we can use these adapters safely. Not a sermon, just a thought.

PS: Does anyone out there actually know the truth's behind this mystery?